1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 29
TROUBLESHOOTING FOR THE HARDWARE
Envelope Drawer
1
Open the paper source drawer, and remove the misfed paper.
2
Check that the guide width is correct, there is no folded/curled paper or overloading, and then
close the drawer.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides. In
particular, be sure that the upper limit for envelope is not exceeded when placing envelope in the Envelope
Drawer. The amount of envelope you can load in the drawer is lower than that for plain paper.
To Next Page
Loading...
