1.TROUBLESHOOTING FOR THE HARDWARE
Refilling With Staples 83
TROUBLESHOOTING FOR THE HARDWARE
2
Remove the staple cartridges.
Replace both cartridges at a time.
3
Press the buttons on both sides of the cartridge.
The transparent cover of the cartridge is lifted.
4
After the transparent cover is lifted, take the empty staple case out of the cartridge.
5
Fit the new staple case into the staple cartridge.
Insert it to the rear until it clicks.
In this step, do not remove the seal bundling the staples.
To Next Page
Loading...
