2 HOW TO MAKE COPIES
24 Placing Originals
Book-type originals
You can place book-type originals on the original glass.
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with
force.
Breaking the glass could injure you.
1
Raise the Original Cover (optional) or the RADF (optional).
3
Lower the Original Cover (optional) or the RADF (optional) carefully.
Do not lower the Original Cover (optional) or the RADF (optional) forcibly when the original is
very thick. There will be no problem in copying even if it is not fully lowered.
Do not look directly at the original glass because intensive light may escape during copying.
2
Open the desired page of the original and place it with
its face down. Align it with the left rear corner of the
original glass.
When you make 2-sided copies from book-type originals in
modes such as book-type original to 2-sided copying or dual
page copying, align the center of the original on the yellow
indicator line of the original glass.
P.85 “Making a 2-sided copy from a book-type original”
P.99 “Dual Page”
To Next Page
Loading...
