2 HOW TO MAKE COPIES
42 Bypass Copying
5
Press [PAPER TYPE] if the paper you placed on the bypass tray is other than plain
paper.
6
Press the button of the same paper type as the paper you placed on the bypass tray.
Then press [OK].
If you select a wrong paper type, this could cause a paper misfeed or significant image trouble.
When you select a paper type, you can confirm it with the icons displayed on the equipment
status indication area. For details, see the table in step 6 in “Copying on A3, A4, B4 and B5 size
paper (in equipment other than for North America) / LD, LT, LG and ST-R size paper (in
equipment for North America)”( P.37)
7
After setting the paper size and paper type, press [OK].
The menu returns to the BASIC menu.
8
Select other copy modes as required, and then press the [START] button on the control
panel.
To Next Page
Loading...
