4. Managing Address Book
72 Network Fax Guide — Managing Address Book
5. Enter the search string in the next field to the “Condition of
search string” drop down box.
6. Click [Add].
• Specified search condition is added to the condition list.
SUPPLEMENT: If you want to clear entered values, click [Clear All].
7. Repeat the procedure from Step 3 to Step 6 to add all
required conditions.
SUPPLEMENT: You can remove the search conditions you have added. To do this, select the condition
and click [Delete].
8. Click [Search].
• It begins searching contacts in the LDAP server. When it completes search-
ing, found contacts appear in the list at the bottom of the dialog box.
SUPPLEMENT: If you want to stop searching, click [Stop].
9. Select contacts that you want to add to the LDAP Address
Book, and click [Add].
• The selected contacts are added to the LDAP Address Book.
To Next Page
Loading...
