EasyManua.ls Logo

Toshiba e-STUDIO 520 - Page 13

Toshiba e-STUDIO 520
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Caution
Do not tilt the multifunctional digital systems more than 10 degrees when moving it. If it falls, this could
result in personal injury.
Avoid placing the multifunctional digital systems in a place unsuitable for its weight and also make sure
the surface is level.
Remember that if the multifunctional digital systems falls over, serious injuries could result.
Weight of the multifunctional digital systems: approx. 463 lb.
There are 4 adjusters (stoppers) at the bottom of the equipment (2 in the rear, 2 in the front). After mov-
ing/installing the equipment, be sure to turn and lower the adjusters, and then fix them firmly on the
floor.
Before moving the equipment, turn and raise the adjusters.
When connecting the optional equipment and interface cable to the multifunctional digital systems, be
sure to turn the power OFF. If the power is not turned off, you could get an electric shock.
To turn the power OFF, see P.34 “Shutdown”.

Other manuals for Toshiba e-STUDIO 520

Related product manuals