16
General Precautions (Cont.)
During maintenance or inspection
Warning
• Never attempt to repair, disassemble or modify the multifunctional digital systems by yourself. You
could cause a fire or get an electric shock.
Always contact your Service representative for maintenance or repair of the internal parts of the multi-
functional digital systems.
• Always keep the plug and outlet clean. Prevent them from accumulating dust and dirt. This could
cause a fire and give you an electric shock due to the heat released by electric leakage.
• Do not let liquids such as water and oil get into the system when cleaning the floor. This could cause a
fire and give you an electric shock.
Caution
• Do not touch the stapling area. The actual needle point could cause you personal injury.
Saddle Stitch Finisher (optional) P.303
Finisher (optional) P.300
Other points
• Do not use such solvents as thinner or alcohol when cleaning the surface of the multifunctional digital
systems.
- This could warp the shape of the surface or leave it discolored.
- When using a chemical cleaning pad to clean it, pay attention to any cautionary points.
To Next Page
Loading...
