32 Precautions for Originals
0.Precautions for Originals
Acceptable originals
When the ADF (DSDF) is used, 2-sided originals can be automatically scanned one sheet after another. When the
original glass is used, originals such as OHP films, tracing paper, booklet or 3-dimensional objects, that cannot be
placed on the ADF can be scanned, as well as plain paper.
* For the originals whose paper weight is more than 157 g/m2 (41.8 lb.), enough image quality may not be able to be obtained.
Automatic size detection does not work properly when A/B format originals are used in equipment for North
America. It does not work properly when LT format originals are used in equipment other than that for North
America.
In some models, automatic size detection does not work properly when K format paper is used for printing. (K
format is a standard paper size in China.)
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
Be sure to place ST-size or A5-size originals in a landscape direction when using the ADF.
A maximum of 1000 sheets can be scanned per 1 copy job or up until the embedded memory becomes full.
There are precautions in addition to the ones above regarding originals to be faxed. For details, refer to the GD-1370
Fax Guide.
Location Maximum size Paper weight
Acceptable sizes for automatic size
detection
Original glass
Length: 297 mm (11.69")
Width: 432 mm (17.01")
—
Other than North America: A3, A4,
A4-R, A5-R, B4, B5, B5-R, 8K, 16K,
16K-R
North America: LD, LG, LT, LT-R, ST-R
ADF (DSDF)
1-sided originals: 35 – 209 g/m
2
(9.3 - 41.8 lb.)*
2-sided originals: 50 – 209 g/m
2
(13.3 - 41.8 lb.)*
Other than North America: A3, A4,
A4-R, A5-R, B4, B5, B5-R, FOLIO
North America: LD, LG, LT, LT-R,
ST-R, COMP
To Next Page
Loading...
