4.TopAccess
[Administration] Tab 39
TopAccess
3 Sync Setting Specify whether or not to synchronize the HOME screen with the network
server or other MFPs.
Disable
: Disable the Home sync function.
Use Network Server for Sync: Select this to use the network server for
synchronization.
Use MFP for Sync: Select this to use MFP for synchronization.
4 Server Name Enter the name of the network server.
5 Port Number Enter the port number of the network server.
6 User Name Enter the name of the user who accesses the network server.
7 Password Enter the password of the user who accesses the network server.
8 Enable SSL/TLS Select whether SSL/TLS is enabled or disabled.
9 Assume this MFP is the
Primary Server
Select this check box to synchronize this MFP as the primary server. When you
clear this check box, another MFP can synchronize as the primary server.
If the FTP server is disabled, you cannot set this MFP as the primary server.
10 Select from Common Settings Select the primary MFP from among the MFPs registered on the [Common
Settings] screen when you set another MFP other than this MFP as the primary
server.
11 Use Separate Settings Enter the IP address of the primary MFP when you set another MFP other than
this MFP as the primary server.
12 Port Number Enter the port number of the primary server when you set another MFP other
than this MFP as the primary server.
13 Enable SSL/TLS Select whether SSL/TLS is enabled or disabled when you set another MFP
other than this MFP as the primary server.
14 Delete All Shared Data Delete all the shared data stored in the FTP server.
Item name Description
To Next Page
Loading...
