4.TopAccess
42 [Administration] Tab
Print Service Settings
P.42 “Setting up USB Cable Print”
The [Print Service] submenu can be accessed from the [Setup] menu on the [Administration] tab.
See the TopAccess Guide for how to access it and the following page for information on the [Setup] menu:
P.24 “[Setup] Item List”
Setting up USB Cable Print
A setting to enable or disable USB Cable Print has been added.
20 [Add] button Allows you to add a group. Click this button to show the [Add Connection
Group Information] screen. Set the following information and click [Save] to
save the settings. To edit the information, click the name of the group added
in the list.
Group Name — Enter the name of the connection group. You can enter up
to 12 characters.
Primary IP Address / Host Name — Enter the IP address or host name of the
primary device which represents the connection group. You can enter up to
256 characters. This device accesses the specified primary device first to
retrieve the job list.
Secondary IP Address / Host Name — Enter the IP address or host name of
the secondary device which represents the connection group. You can enter
up to 256 characters. If the access to the primary device fails, this device
accesses the specified secondary device next to retrieve the job list.
21 [Delete] button Allows you to delete the selected group.
22 Group Name Shows the name of the added connection group.
23 Primary IP Address / Host
Name
Shows the IP address or host name of the primary device which represents the
added connection group.
24 Secondary IP Address / Host
Name
Shows the IP address or host name of the secondary device which represents
the added connection group.
25 [Delete All] button Deletes all of the multi station print jobs.
Item name Description
1 USB Printing Set whether to enable or disable USB cable printing.
2 USB Cable Print Mode Select the mode used for printing via a USB connection.
IPP Over USB — Normally use this mode.
Legacy USB (Win) — Use this mode when you are already using our MFPs and
want to grant priority to the compatibility with them.
Item name Description
To Next Page
Loading...
