Toshiba E-STUDIO 5518A - Page 43

4.TopAccess
[Administration] Tab 43
TopAccess
 Off Device Customization Architecture settings
Set ODCA (Off Device Customization Architecture) when you are linking external application software to services
provided by this equipment.
For details, refer to the application software manual.
 P.43 “Setting up Network”
 P.43 “Setting up Configuration”
 P.43 “Notification Events”
The [ODCA] submenu can be accessed from the [Setup] menu on the [Administration] page.
See the TopAccess Guide for how to access it and the following page for information on the [Setup] menu:
 P.24 “[Setup] Item List”
Setting up Network
You can set up the network respectively for SOAP (Simple Object Access Protocol) and REST (REpresentational State
Transfer).
Setting up Configuration
Notification Events
Item name Description
1 Enable Port Select whether the external connection is enabled or disabled.
2 Port Number Specify the port number where the external connection is enabled.
3 Enable SSL/TLS Port Port Select whether SSL/TLS is enabled or disabled for the external connection.
4 SSL/TLS Port Number Specify the SSL/TLS port number where the external connection is enabled.
Item name Description
1 Session Timeout(60-99999) Specify the duration to maintain the connection.
Item name Description
1 [Delete All] button Deletes all notification events registered with external application software.
1
2
3
4
1
2
3
4
1
1