Toshiba E-STUDIO 5528A - Description of Components; E-STUDIO6525 AC Series, E-STUDIO6528 A Series

8 Description of Components
0.Description of Components
 e-STUDIO6525AC Series, e-STUDIO6528A Series
 Front / Right Sides
1. Reversing Automatic Document Feeder or Dual Scan Document Feeder
Scans both sides of the original one sheet at a time.
Specifications - SPECIFICATIONS OF OPTIONS
2. USB terminal (4-pin)
Connects to a computer with a commercially available USB cable.
3. LAN port
Connects to a network.
4. Automatic duplexing unit
Prints on both sides of the paper.
Open to clear misfed paper.
5. Bypass tray
For printing on special media types such as OHP film.
6. Paper holding lever (e-STUDIO2020AC/2520AC, e-STUDIO2528A/3028A/3528A/4528A)
Places paper on the bypass tray.
7. Paper feed cover (on equipment)
Open to clear misfed paper.
8. Paper feed cover
Open to clear misfed paper in the Paper Feed Pedestal or Large Capacity Feeder.
9. Paper size indicator
You can check the size of the paper set in the drawer.
10. Paper Feed Pedestal and Additional Drawer Module or Large Capacity Feeder
The Paper Feed Pedestal adds one drawer. The Additional Drawer Module can be installed. You can load A4 and
LT size paper in the Large Capacity Feeder.
Specifications - SPECIFICATIONS OF OPTIONS
11. Drawer
Load paper in the drawer.
Specifications - SPECIFICATIONS OF PAPER - Acceptable paper
10
9
4
5
6
7
8
13
11
13, 14
1
2
3
12