1.TROUBLESHOOTING FOR THE HARDWARE
58 Clearing a Paper Misfeed
3
Close all the drawers or covers.
4
Press [Delete] when “Select handling method of suspended print job.” appears.
The print job is canceled.
When Job Skip Control is enabled, [Skip] is displayed. If [Skip] is selected, the print job remains paused. For
details of Job Skip Control, see the reference below:
User Functions - SETTING ITEMS (Admin) - General - Setting the job control
If you do not want to delete the print job
To restart the job without canceling it, replace the paper in the drawer with that corresponding to the size set in
the equipment after the paper misfeed is cleared. After that, press [Resume] in Step 4. The print job can be
resumed. In this case, it is not necessary to follow step 5 and later.
5
Press [User Functions - User-] on the touch panel to access the User Functions menu.
6
Press the [User] tab to enter the User menu and press [Drawer].
To Next Page
Loading...
