1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 59
TROUBLESHOOTING FOR THE HARDWARE
7
Press the drawer button indicated in the message.
8
Set the paper size again and press [OK].
For details about how to set the paper size, see the reference below:
Preparation of Paper - LOADING PAPER - Doing Paper Settings - Setting paper size
9
Press the [HOME] button to return to the basic menu. Then press [Copy] to enter the copy menu.
10
Confirm that the paper size is correctly detected if you selected [Auto (mm)] or [Auto (inch)] in
step 8.
The detected paper size is indicated on the drawer button in the equipment status indication area on the left.
An incorrect paper size or “ ” indicates an unsuccessful detection. In this case, see the reference below:
P.9 “When This Screen Is Displayed”
11
Try copying or printing again.
To Next Page
Loading...
