1.LOADING PAPER
14 Loading Paper in Drawers
10
The confirmation screen appears. If the status is correct, press [Yes].
The menu above may not appear depending on the setting of this equipment. If it is not, check that the correct
paper size appears in the equipment status indication area on the menu screen.
If you want to change the setting for displaying this menu, ask your administrator.
During printing from the Paper Feed Pedestal, if you place paper in another drawer, there may be a delay in
detecting the amount of remaining paper.
If the detected paper size or type differs from the actual one, see the following pages to change the paper size
or type.
P.16 “Setting paper size”
P.18 “Setting paper type”
If you press [Yes], the procedure is completed.
To Next Page
Loading...
