1.TROUBLESHOOTING FOR THE HARDWARE
46 Clearing a Paper Misfeed
10
Close the upper receiving tray of the finisher.
Place your hands on the near and far side of the lever and push to close the tray until it clicks.
Be careful not to let your fingers be caught between the finisher body and the upper tray of the finisher.
This could injure you.
The upper receiving tray of the finisher can also be closed by pressing the right side of the lever.
11
Close the cover of the Hole Punch Unit when it is installed.
12
Close the front cover of the finisher.
To Next Page
Loading...
