Chapter 1 PREPARATIONS
16
Conguration of options
1. Finisher (MJ-1027)
This Finisher enables sort/group nishing and stapling.
The Hole Punch Unit (optional, MJ-6003) and the Inserter
(optional, MJ-7001) can be installed in this Finisher.
2. Saddle Stitch Finisher (MJ-1028)
This Finisher enables saddle stitching, in addition to sort/
group nishing and stapling. A maximum of 50 sheets of
80 g/m
2
or 20 lb. Bond plain paper can be stapled. The
Hole Punch Unit (optional, MJ-6003) and the Inserter
(optional, MJ-7001) can be installed in this Finisher.
3. Saddle Stitch Finisher (MJ-1029)
This Finisher enables saddle stitching, in addition to sort/
group nishing and stapling. A maximum of 100 sheets of
80 g/m
2
or 20 lb. Bond plain paper can be stapled. The
Hole Punch Unit (optional, MJ-6003) and the Inserter
(optional, MJ-7001) can be installed in this Finisher.
4. Hole Punch Unit (MJ-6003)
This unit enables you to punch holes in printed sheets.
5. Inserter (MJ-7001)
This unit enables you to insert a sheet of paper which
does not need to be copied. An already copied sheet, as
well as a blank sheet, can be inserted. This inserter is also
usable for single nishing operation without copying,
such as stapling or hole-punching.
6. External Large Capacity Feeder (MP-4004)
This feeder enables you to feed A4 or LT paper up to 4000
sheets (80 g/m
2
or 20 lb. Bond). Thick paper (up to 209
g/m
2
or 110 lb. Index) can also be set in this feeder.
To Next Page
Loading...
