Toshiba E-Studio 655 - Adding Staples

3
2
1
4
5
The procedure for adding staples of the Finisher (optional) is as follows.
Adding Staples
Adding Staples
1
Open the front cover of the Finisher.
1
2
2
Take o the staple cartridge.
3
Take the empty staple case out of the staple
cartridge.
1
2
4
Install a new staple case into the staple cartridge
and pull out the seal.
1
2
5
Install the staple cartridge.
6
Close the front cover of the Finisher.
Finisher (Optional: MJ-1027/MJ-1028)
47