Chapter 4 ADVANCED FUNCTIONS / TROUBLESHOOTING
54
Attaching the scanned data to an E-mail
EXAMPLE
The procedure for attaching the scanned
data to an E-mail and sending it to the
specied E-mail address is as follows.
1. Place the original(s).
2. Press [E-MAIL] on the touch panel.
3. Specify the E-mail address and then
press [OK].
4. Dene the settings for the le as required.
5. Press [SCAN] on the touch panel.
For details, refer to the Scanning Guide.
COPY FAX SCAN e-FILING PRINT
To Next Page
Loading...
