4 EDITING FUNCTIONS
126 Outside Erase
3) Press [OK].
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with
force.
Breaking the glass could injure you.
6
Select other copy modes as required, and then press the [START] button on the control
panel.
5
Place the original on the original glass.
y When placing the original, be sure that the RADF is fully raised.
If not, this function may not properly be able to detect the border
between the original and areas not belonging to it.
y Do not directly look at the original glass during copying since an
intense light may leak.
To Next Page
Loading...
