1 BEFORE USING EQUIPMENT
16 Placing Paper
13
Select the size and type of the paper placed in the drawer on the touch panel.
1) Select the paper size.
2) Select the paper type.
3) Press [OK].
When the paper size has been set to [AUTO (mm)] or [AUTO (inch)], it is registered automatically and its
buttons do not appear on this screen. If you want to register the corresponding paper size manually, see the
following page to change the settings.
P.16 “Registering paper size”
Registering paper size
When you place paper for the first time or you replace the paper with that of a different size, you need to register the size
to this equipment.
2
Press the [USER] tab on the touch panel to display the user setting menu, and then
press [DRAWER].
When paper size is set to be detected automatically:
When [AUTO (mm)] or [AUTO (inch)] has been selected for the paper size, the following procedure is not required. The paper size is
set automatically.
1
Press the [USER FUNCTIONS] button on the control
panel.
To Next Page
Loading...
