2.HOW TO MAKE COPIES
Bypass Copying 41
2 HOW TO MAKE COPIES
7
Select other copy modes as required, and then press the [START] button on the control
panel.
When you copy on sheets of OHP film, remove the copied OHP film one sheet at a time as they exit onto the
receiving tray. If the sheets of OHP film pile up, they may get curled and may not be projected properly.
Copying on other than the above standard sizes of paper
1
Place the original(s) and paper in the same procedure noted in steps 1 and 2 in
“Copying on A3, A4, B4 and B5 size paper (in equipment other than for North America)
/ LD, LT, LG and ST-R size paper (in equipment for North America)” ( P.3 8 )
2
Press [SIZE SETTING] on the touch panel.
3
Press the button of the same size as the paper you placed on the bypass tray.
The selected size will be registered as an “OTHER” size.
To Next Page
Loading...
