1.LOADING PAPER
18 Doing Paper Settings
Setting paper type
When you place any special paper other than plain paper or that not used for normal copying, you need to set the
thickness and attribute into this equipment. For acceptable paper type, refer to the Specifications Guide.
The set paper type appears on the equipment status indication area with an icon.
When you select a paper type, you can confirm it with the icons displayed on the equipment status indication area as
shown below.
Thickness (Paper Feed Unit, Paper Feed Pedestal, Large Capacity Feeder)
*1 These types of paper cannot be accepted for the Large Capacity Feeder.
Thickness (Bypass Tray)
*1 Select Special 1 and Special 2 when you use waterproof paper.
Icon Thickness
—Plan
Thick
Thick 1
*1
Thick 2
*1
Thick 3
*1
Recycled Paper
Icon Thickness Icon Thickness
—
Plain Transparency
Thick Recycled Paper
Thick 1
Special 1
*1
Thick 2
Special 2
*1
Thick 3 Envelope
Thick 4
To Next Page
Loading...
