Toshiba E-Studio 857 - Staple Jam in the Saddle Stitch Finisher MJ-1029

1 TROUBLESHOOTING FOR THE HARDWARE
36 Clearing a Staple Jam
7
Close the front cover of the finisher.
 Staple jam in the Saddle Stitch Finisher MJ-1029
5
Holding the knob, raise the guide, and return it to its
original position.
6
Fit the staple cartridge into the stapler.
Insert the cartridge until the lever of the stapler goes up to be
fixed securely.
1
Open the front cover of the finisher.
2
Fully raise the lever of the staple cartridge, and pull
the cartridge out.
2
1