Options
65
Other options available are as follows. Contact your service technician or representative for details.
FAX Unit (GD-1350)
This is a unit for using the equipment as a Fax machine.
Installed inside of the equipment.
2nd Line for FAX Unit (GD-1260)
This unit enables you to add a line to the Fax, making a 2nd line
available.
• Installed inside of the equipment.
• The FAX Unit (optional, GD-1350) is required.
Printer Kit (GM-1250)
This is a kit for using the printer function.
Printer/Scanner Kit (GM-2270)
This is a kit for using the printing and scanning functions.
Scanner Kit (GM-4250)
This kit enables the scanning function.
Operator’s Manual Pocket (KK-8560)
Keep the manual in this pocket.
Wireless LAN Module (GN-1060)
This module enables the equipment to be used in a wireless LAN
environment.
• Installed inside of the equipment.
• The Antenna (optional, GN-3010) is required.
• The equipment cannot be connected to the wireless and wired
LAN at the same time.
Antenna (GN-3010)
This is used when the Wireless LAN Module is installed.
e-BRIDGE ID Gate (KP-2004, KP-2005)
You can log in and use the equipment simply by holding the IC
card over the e-BRIDGE ID Gate.
• Installed on the right-hand side of the equipment.
• This cannot be installed with the Work Table at the same time.
Data Overwrite Enabler (GP-1070)
This is an enabler to erase the data stored temporarily when
copying, printing, scanning, faxing, Internet Fax or network Fax
is performed. It overwrites temporarily stored data with random
data.
IPsec Enabler (GP-1080)
This enables the IPsec function in this equipment.
Meta Scan Enabler (GS-1010)
This enables the Meta Scan function in this equipment.
External Interface Enabler (GS-1020)
This enables the EWB function in this equipment.
Unicode Font Enabler (GS-1007)
This enables printing from the SAP environment using Unicode
font with this equipment.
Finisher Guide Rail (KN-1017)
This unit is used when the equipment is installed on soft surface
ooring. This allows you to separate/install an optional nisher
from/to the equipment easily.
Side Receiving Tray (KA-8560)
Printed paper exits on this tray.
• Installed on the left side of the equipment.
Depending on the model, options have been already installed and the functions can be used.
To Next Page
Loading...
