e-STUDIO163/166/203/206 © 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
TROUBLESHOOTING
5 - 42
22)Blotched image
Fig. 5-22
Defective area Step Check items Prescription
Paper 1 Is the paper type corresponding to its
mode?
Check the paper type and mode.
2 Is the paper too dry? Change the paper.
Separation 3 Is the output from the separation
charger too high?
Adjust the output, from the separa-
tion charger.
Transfer 4 Is the transfer charger case dirty? Clean the transfer charger case.
5 Is the transfer charger wire dirty? Clean the transfer charger wire.
High-voltage transformer
(Transfer charger)
6 Is the output from the high-voltage
transformer normal?
Adjust the output. Replace the trans-
former if necessary.
Feeding direction
To Next Page
Loading...
