Toshiba e-studio162 User Manual (English)

Questions and Answers:

C
Crystal SkinnerAug 21, 2025
Why does my Toshiba e-studio162 say 'Error indicator'?
- N
  nedwardsAug 21, 2025
  The 'Error indicator' on your Toshiba All in One Printer may appear due to several reasons: * A paper misfeed has occurred. In this case, remove the misfeed. * The cover or the ADF/RADF cover is open. Close the cover. * The toner cartridge is empty. Replace it. * The scan head locking switch is locked. Turn off the power, release the switch, and turn the power back on. * If [L1-00] appears, turn the power switch off, wait about 10 seconds, and then turn it on again.
S
spencermilesAug 23, 2025
What to do if my Toshiba e-studio162 All in One Printer has a paper misfeed?
- H
  Hector MurilloAug 23, 2025
  If your Toshiba All in One Printer indicates a paper misfeed, remove the misfeed.
J
jthomasAug 25, 2025
Why won't my Toshiba e-studio162 All in One Printer operate?
- M
  Mary StewartAug 25, 2025
  Your Toshiba All in One Printer might not operate for the following reasons: * It is not plugged into a power outlet. Plug the machine into a grounded outlet. * The power switch is OFF. Turn the power switch ON. * The power save indicator is blinking. Wait until the machine has finished warming up. * The front cover or the side cover is not completely closed. Close the cover. * The machine is in auto power shut-off mode. Press the [START] key to resume normal operation. * The scan head locking switch is locked. Unlock the scan head locking switch.
M
Micheal PerkinsAug 27, 2025
Why are my Toshiba All in One Printer copies smudged or dirty?
- P
  Peggy ThomasAug 27, 2025
  Copies from your Toshiba All in One Printer might be smudged or dirty because: * The document glass or the underside of the document cover/ADF/RADF is dirty. Clean regularly. * The original is smudged or blotchy. Use a clean original.
N
nicholasowenAug 28, 2025
What to do if my Toshiba e-studio162 All in One Printer copies are too dark or too light?
- M
  Mario RobertsonAug 28, 2025
  If your Toshiba All in One Printer produces copies that are too dark or too light, select AUTO with the [EXPOSURE] key or manually select an appropriate exposure using the [ ] key or [ ] key. If the copy remains too light or too dark even with AUTO selected, adjust the automatic exposure level.
J
Jennifer JonesAug 29, 2025
How to fix white or black lines on Toshiba All in One Printer copies?
- A
  Annette GreenAug 29, 2025
  White or black lines on copies from your Toshiba All in One Printer may appear if: * The scanner glass for the ADF/RADF is dirty. Clean the long, narrow scanning window. * The transfer charger is dirty. Clean the transfer charger.
S
Sharon CampbellAug 31, 2025
What to do if my Toshiba e-studio162 shows 'LOAD XXXX PAPER INTO TRAY'?
- D
  Danny HopkinsAug 31, 2025
  If your Toshiba All in One Printer displays 'LOAD XXXX PAPER INTO TRAY', it means the paper size setting differs from the paper loaded in the tray. Load the same size of paper as the paper size setting and then press the [START] key to begin printing.
Y
yweissSep 1, 2025
What does 'CHECK ADF/RADF. START TO RESUME' mean on my Toshiba e-studio162 All in One Printer?
- W
  waynejohnsonSep 1, 2025
  The message 'CHECK ADF/RADF. START TO RESUME' on your Toshiba All in One Printer indicates: * An original remains on the document glass, or the original is too thick to scan. Remove the original. * The underside of the ADF/RADF is dirty. Clean the underside of the ADF/RADF, especially areas where black lines appear.
K
Kevin HolmesSep 3, 2025
Why does my Toshiba e-studio162 make blank copies?
- D
  Don ThomasSep 3, 2025
  Your Toshiba All in One Printer may produce blank copies if the original is not placed correctly. Place the original face up in the ADF/RADF or face down on the document glass.
A
Amy BurkeSep 4, 2025
How to fix 'NO PC COMMUNICATION; CHECK CABLE' on Toshiba All in One Printer?
- M
  melvin14Sep 5, 2025
  If your Toshiba All in One Printer displays 'NO PC COMMUNICATION; CHECK CABLE', it means the machine is not correctly connected to the computer. Check the cable when using the scanner function.

Toshiba e-studio162 Specifications

General

Print Speed (Black)	16 ppm
Max Resolution (B&W)	600 x 600 dpi
Copy Speed	16 cpm
Copy Resolution	600 x 600 dpi
Functions	Copier, Printer, Scanner
Paper Capacity	250 sheets
Interface	USB 2.0