What causes signal error on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'Signal Error or Line Condition Error', retry communications. Frequent failures may indicate a phone line problem. If possible, move the unit to another line and try your communications again.
How to clear original jam in Toshiba All in One Printer?
If your Toshiba All in One Printer displays an 'Original jam' error, the solution is to clear the jammed original.
How to fix print enable error on Toshiba All in One Printer?
If you want to use the printing function of Toshiba All in One Printer and it displays 'Print enable error', please purchase the Printer Kit or Printer/Scanner Kit.
How to resolve partial email timeout error on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'Partial Email timeout error', ask the sender to resend the Email, or change the Partial Wait time setting.
How to resolve pop3 server communication error on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'POP3 server communication error', ask your administrator that the POP3 server address is correctly set, or the POP3 server works properly.
How to resolve SMTP server connection error on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'SMTP server connection error', ask your administrator to set the login name or password of SMTP server and perform the job again. Check if the SMTP server is operating properly.
How to fix job control module access abnormality on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'Job control module access abnormality', turn the power OFF and then back ON. Perform the job in error again. If the recovery is still not completed, contact your service representative.
How to resolve failed to create directory on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'Failed to create directory', make sure that the access privilege to the storage directory is writable and the server or local disc has a sufficient space. Then retry the scan.
How to resolve offramp security error on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'Offramp security error', confirm that specified fax numbers are registered in the address book of the equipment. If not, register the fax numbers in the address book and ask the sender to resend the Email with correct fax numbers.
How to fix software failure on Toshiba All in One Printer?
If your Toshiba All in One Printer displays 'Software failure', retry communications. If the error still occurs, contact your service representative.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Speed (Black) | 28 ppm |
| Copy Speed (Black) | 28 cpm |
| Duplex Printing | Yes |
| Operating System Compatibility | Windows, Mac, Linux |
| Connectivity | Ethernet, USB |
| Scan Resolution | 600 dpi |
| Power Consumption | 1.5 kW |
To Next Page
