To Next Page
B
Brian TylerAug 13, 2025
What to do if my Toshiba Copier says 'TONER EMPTY'?
- JJonathan JohnsonAug 13, 2025
If your Toshiba Copier displays 'TONER EMPTY', this means it's time to replace the used toner cartridge with a new one.
What to do if my Toshiba Copier says 'TONER EMPTY'?
If your Toshiba Copier displays 'TONER EMPTY', this means it's time to replace the used toner cartridge with a new one.
What to do if my Toshiba Copier says 'TONER IS LOW'?
If your Toshiba Copier shows 'TONER IS LOW' on the LCD screen, you don't need to replace the toner cartridge immediately. Wait until 'TONER EMPTY' appears before replacing it.
What to do if my Toshiba Copier says 'DRAWER * EMPTY'?
If your Toshiba Copier displays 'DRAWER * EMPTY', it means the paper in the indicated drawer has run out. Simply load more paper into the drawer to continue.
How to fix 'CHECK:PAPER SIZE' error on my Toshiba Copier?
If you see 'CHECK:PAPER SIZE' on your Toshiba Copier, it indicates that the paper size set for the bypass tray is incorrect. Remove the paper, reload it until the display shows 'BYPASS PAPER SIZE', and then set the correct paper size. For non-standard sizes, select 'CUSTOM'.
Why does my Toshiba Copier say 'ERROR : TONER'?
If your Toshiba Copier shows 'ERROR : TONER', it means the toner cartridge isn't installed correctly. Make sure you install the toner cartridge correctly.
What to do if my Toshiba Copier says 'MEMORY IS FULL PRESS ANY KEY'?
If your Toshiba Copier displays 'MEMORY IS FULL PRESS ANY KEY', press any button on the control panel to delete the scanned data.
What does 'BYPASS EMPTY' mean on my Toshiba Copier?
If the Toshiba Copier displays 'BYPASS EMPTY', it means you need to load paper onto the bypass tray.
What does 'CLOSE ***' mean on my Toshiba Copier?
If the Toshiba Copier shows 'CLOSE ***', ensure that you securely close the indicated cover.
Provides an overview of the equipment's physical parts, including front, side, and internal components.
Details the procedure for turning the equipment on, including warm-up and department code entry.
Explains how to load various types of paper into the equipment's drawers and bypass tray.
Guides users on how to register paper size and type information in the equipment for correct operation.
Outlines the fundamental steps required to perform a basic copy operation on the equipment.
Explains how to adjust various settings for copy jobs, such as exposure, paper selection, and zoom.
Explains how to print documents directly from Windows applications using the printer driver.
Explains how to print documents from Mac OS X applications, including page setup and print options.
Details how to set page attributes, custom sizes, and print options within Mac OS X applications.
Lists common error messages and their corresponding countermeasures for equipment problems.
Provides guidance on finding and removing paper misfeeds from various locations within the equipment.
Details the procedure for replacing the toner cartridge when it runs out of toner.
General| Functions | Print, Copy, Scan |
|---|---|
| Print Speed (Black) | 28 ppm |
| Warm-up Time | Approx. 18 seconds |
| Duplex Printing | Manual |
| Scan Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Zoom | 25% to 400% |
| Connectivity | USB 2.0 |
| Memory | 512 MB |
| Processor Speed | 360 MHz |
| Max Paper Size | A3 |
| Paper Capacity | 250 sheets |
| Paper Size | A3, A4, A5, B5 |
| Scan Speed | 25 ipm |
| Copy Speed | 28 cpm |
| Operating System Compatibility | Windows, Mac |
| Print Resolution | 2400 x 600 dpi (with smoothing) |
| Paper Weight | 64-216 gsm |
