9 Appendix
222 e-STUDIO2309A/2809A Specifications
e-STUDIO2309A/2809A Specifications
Model name DP-2309A/2809A
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fusing method Two halogen lamp
Photosensor type OPC
Original scanning system Flat surface scanning system
(When the Reversing Automatic Document Feeder is installed:
Fixed scanning system by feeding the original)
Original scanning sensor Linear CMOS sensor
Scanning light source LED
Resolution Writing 2400 dpi x 600 dpi (Smoothing process)
Scanning 600 dpi x 600 dpi
Acceptable originals Sheets and books
Acceptable original size Original glass: Max. A3 or LD
Reversing Automatic Document Feeder: Max. A3 or LD
Acceptable paper size Drawer A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R,
ST-R, COMP, 13"LG, 8.5"SQ, 8K, 16K, 16K-R
Bypass A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R,
ST-R, COMP, 13"LG, 8.5"SQ, 8K, 16K, 16K-R, COM10,
Monarch, DL
Acceptable paper weight Drawer
64 - 80 g/m
2
(17 - 20 lb. Bond)
Bypass
64 - 80 g/m
2
(17 - 20 lb. Bond) : for continuous feed
52 - 63 g/m
2
(14 lb. Bond - 16 lb. Bond), 81 - 216 g/m
2
(21 lb.
Bond - 110 lb. Index/80 lb. Cover) : for single feed
Warm-up time Approx. 18 seconds (Approx. 24 seconds or less when
GA-1340 is installed)
First copy time (A4 or LT portrait) A4: Approx. 6.4 seconds
LT: Approx. 6.5 seconds
Continuous copy speed See P.223 “Continuous copying speed”
Multiple copying Up to 999 copies
Excluded image width Copy Leading edge: 3.0±2.0 mm (0.12"±0.08")
Trailing edge: 2.0±2.0 mm (0.08"±0.08")
Both edges: 2.0±2.0 mm (0.08"±0.08")
Printer Leading edge: 5.0±3.0 mm (0.20"±0.12")
Trailing edge: 5.0±3.0 mm (0.20"±0.12")
Both edges: 5.0±3.0 mm (0.20"±0.12")
Reproduction ratio Actual size 100±0.5%
Zoom 25 - 400% (in 1% increments)
Storage capacity Max. 150 sheets or until the memory is full (TOSHIBA’s own
chart)
Paper supply Drawer
250 sheets (80 g/m
2
, 20 lb. Bond)
Bypass
100 sheets (80 g/m
2
, 20 lb. Bond)
Loading capacity for the receiving tray
Approx. 100 sheets (80 g/m
2
, 20 lb. Bond)
Toner density adjustment Magnetic auto-toner system
Exposure control Automatic plus manual selection from 9 exposure steps
Memory 512MB (1 GB when GA-1340 is installed)
USB interface USB2.0 (Hi-Speed)
Environment (for normal use) Temperature: 10 º - 30 ºC, Humidity: 20 - 85% (No
condensation)
To Next Page
Loading...
