Why is my Toshiba All in One Printer showing 'INSTALL A TONER CARTRIDGE'?
If your Toshiba All in One Printer shows 'INSTALL A TONER CARTRIDGE', the toner cartridge is not installed correctly. Reinstall the toner cartridge.
Why does my Toshiba e-studio162 All in One Printer say 'MEMORY FULL, PRESS START TO RESUME'?
The message 'MEMORY FULL, PRESS START TO RESUME' on your Toshiba All in One Printer indicates that data is being held in memory. Print the data or clear it from memory.
How to solve 'Paper size for a paper tray cannot be set' on Toshiba e-studio162 All in One Printer?
If you cannot set the paper size for a paper tray on your Toshiba All in One Printer: * Set the paper size after copying or printing is complete. * Load paper or remove the misfeed, and then set the paper size.
General| Print Speed (Black) | 16 ppm |
|---|---|
| Max Resolution (B&W) | 600 x 600 dpi |
| Copy Speed | 16 cpm |
| Copy Resolution | 600 x 600 dpi |
| Functions | Copier, Printer, Scanner |
| Paper Capacity | 250 sheets |
| Interface | USB 2.0 |
Details the procedure for turning the machine on and off, including power save modes.
Details the basic steps for making copies using the document glass.
Explains how to perform automatic duplex copying, copying both sides of originals.
Outlines hardware and software requirements necessary for installing the machine's software.
Provides step-by-step instructions for installing the printer and scanner drivers and utilities.
Details how to establish a physical connection between the machine and a computer using USB or parallel cables.
Explains how to use the machine as a printer, including basic printing procedures.
Details how to operate the machine as a scanner, including using the operation panel.
Lists customizable machine settings available through user programs, categorized by function.
Explains error indicators and display messages, linking them to their causes and solutions.
Addresses common operational problems related to the machine's general function and copying.
Provides detailed procedures for clearing paper jams from various locations within the machine.
Guides users on how to replace the toner cartridge when it is empty or low.
Explains how to unlock the scan head locking switch to enable machine operation.
Instructs users on actions to take when the machine indicates a need for service.
To Next Page