Toshiba e-studio162 - SELECTING A SETTING FOR A USER PROGRAM

USER SETTINGS
65
7
14 KEY PRESS TIME
1: NORMAL
2: 0.5 SEC.
3: 1.0 SEC.
4: 1.5 SEC.
5: 2.0 SEC.
• Use this setting to select how
long a key must be pressed
for the input to be accepted.
By selecting a longer time,
you can prevent settings from
being changed by the
accidental pressing of a key.
15
KEY TOUCH
SOUND
1: LOW
2: HIGH
3: OFF
• This sets the volume of beep
signals. (p.68)
16
SOUND AT
DEFAULT
1: ON
2: OFF
• Use this to sound a beep
when a base setting is
selected. (p.68)
17
TONER SAVE
MODE
1: ON
2: OFF
• This mode reduces toner
usage by about 10% when
copying. Toner save mode is
effective when the exposure
mode is AUTO or TEXT.
18 AE LEVEL ADJUST
1: ADF/RADF*
1
2: DOCUMENT
GLASS
• This is used to adjust the
exposure level.
• The automatic exposure level
can be adjusted separately for
the document glass and the
ADF/RADF.
• The factory default setting for
the exposure level is "center".
19 LANGUAGE
1: AMERICAN
ENGLISH
2: FRENCH
3: SPANISH
•
•
•
• This is used to set the
language used in the display.
20 RESET FACTORY
1: YES
2: NO
• This is used to return all
settings to the factory default
settings.
21
SORT AUTO
SELECT*
1
1: ON
2: OFF
• Use this setting to select the
sort copy as default output
mode for copying from the
ADF/RADF.
Program
number
Program name
Setting codes
(factory default
setting appears
in bold)
Explanation
*
1
When the ADF/RADF is installed.