© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO163/166/203/206
FIRMWARE UPDATING
6 - 11
6
5) Select the file for the download firmware.
Fig. 6-16
Click [Browse] to select the file to be downloaded.
The selected files are displayed in File.
Fig. 6-17
Notes:
• Only one data file can be downloaded in one go. Make sure that downloading cannot be per-
formed when both the check boxes of "Bank 1" and "Bank 2" are checked.
• The following files should be selected for the banks.
Select files according to bank.
Bank 1: Program data
Bank 2: Function data
Bank 3: (Not used)
• When an inappropriate file is selected for the bank, the following message is displayed.
Select the appropriate file.
Fig. 6-18
06/11
To Next Page
Loading...
