© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO163/166/203/206
FIRMWARE UPDATING
6 - 15
6
(7) Select "e-STUDIO163/203/166/206" check box in the Product Name field.
Fig. 6-24
(8) Confirm that both the "Program" and the "Function" check boxes in the Download Area field are
selected, and then click [ALL].
Fig. 6-25
Note: Note:
In e-STUDIO163/166/203/206, the downloaded area has two selections; "Program (program
data)" and "Function (function data)". Updating is available on each area individually, but it is rec-
ommended that you update data on all the areas.
Perform step (8) when you want to update all the data in one go. Perform the following procedure
when you want to update the data individually.
07/05
To Next Page
Loading...
