© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO163/166/203/206
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 9
2
Code Function Code Function Procedure
101 Main motor ON (operational without
developer unit)
151 Code No. 101 function OFF 1
102 Toner motor ON (normal rotation) 152 Code No. 102 function OFF 1
103 Polygonal motor ON (600 dpi) 153 Code No. 103 function OFF 1
108 Registration clutch ON 158 Code No. 108 function OFF 1
110 ADU motor ON (low speed) 160 Code No. 110 function OFF 1
118 Laser ON 168 Code No. 118 function OFF 1
201 Pickup solenoid ON/OFF 3
202 PFU pickup solenoid ON/OFF 3
203 PFU transport clutch (high speed) ON/OFF 3
204 Bypass pickup solenoid ON/OFF 3
205 PFU transport clutch (low speed) ON/OFF 3
218 Key copy counter count up 2
235 Discharge LED ON/OFF 3
236 Exhaust fan ON/OFF (low speed) 3
237 Exhaust fan ON/OFF (high speed) 3
249 Developer bias [-DC] ON/OFF 3
252 Main charger ON/OFF 3
253 Separation bias ON/OFF 3
255 Transfer guide bias ON/OFF 3
256 Transfer transformer ON/OFF 3
261 Scan motor ON (Automatically stops at limit position) 2
267 Contact image sensor (CIS) Unit ON/OFF 3
281 ADF feed motor ON/OFF (normal rotation) 3
282 ADF feed motor ON/OFF (reverse rotation) 3
283 ADF read motor ON/OFF (normal rotation) 3
411 Switching regulator cooling fun high speed rotation/low speed rotation 3
07/11
To Next Page
Loading...
