Toshiba e-STUDIO166 - Country;Region Code (02)

© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO163/166/203/206
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 63
2
2.2.10 Country/Region code (02)
It is not necessary to set the Country/Region code normally. When the SRAM board is replaced, this
setting is required following the procedure below.
<Procedure>
<Code>
Model
Code (Default)
e-STUDIO165/205 e-STUDIO167/207/237
NAD 1 1
AUD - 61
ASU/SYD/SAD - 65
CND 86 86
ASD - 852
TWD 886 886
ARD - 55
KRD 82 65
MJD 44 44
[INTERRUPT]
[0][2]
[POWER]
[Digital keys]
Code
[FUNCTION CLEAR]
Cancel
Stores
value in RAM
[CLEAR/STOP]
Does not stores
value in RAM
Warming up