2.OPERATIONS WITH THIS EQUIPMENT
Storing Documents 25
OPERATIONS WITH THIS EQUIPMENT
The acceptable number for reserving scanning jobs differs depending on the settings. If the reserved jobs exceed
the corresponding number, the full reservation message will be displayed. In this case, wait until the reserved
scanning jobs are reduced or delete unnecessary reservations (scanning jobs).
P.26 “Deleting print jobs”
Scanning the next original (scan)
When the original is set on the glass or [Continue] is pressed during scanning on the ADF, the confirmation
screen for the next original will be displayed.
In either case, when you set the next original and press [Scan], it will be scanned. Follow this procedure as
many times as necessary. When all of the scanning is finished, press [Job Finish].
You can change the scan setting by pressing [Scan Setting].
You can cancel the reservation of the scanned data by pressing [Job Cancel].
To Next Page
Loading...
