To Next Page
S
Shannon LopezJul 27, 2025
Why is the copied image from my Toshiba All in One Printer too light?
- Mmichael77Jul 27, 2025
If the copied image from your Toshiba All in One Printer is too light, it could be due to several reasons. First, the toner might be depleted; if you see a message like “Install new *** toner cartridge”, replace it. Another reason might be that the copy density is set too light; try darkening the density manually or using the automatic density mode. If you are copying an original printed with erasable blue toner on an e-STUDIO5008LP Series, ensure that you are using the [Blue Original] mode. Also, in the e-STUDIO5008LP Series, if you are performing black-and-white copying with [Thick] paper selected, try selecting [Thick 1] as the paper type.
General
