Toshiba E-STUDIO2000AC - Setting the Layout and Finishing Options; Sorting Printouts by Copies (Collate

PRINTING FROM MAC OS APPLICATIONS
Setting the Layout and Finishing Options 109
0. Setting the Layout and Finishing Options
 P.109 “Sorting printouts by copies (Collate pages)”
 P.111 “Printing on both sides of a sheet”
 P.112 “Making a booklet (Booklet)”
 P.113 “Printing multiple pages per sheet”
 P.114 “Printing in reverse page order”
 P.114 “Printing only odd or even pages”
 P.115 “Stapling”
 P.117 “Hole Punch”
 P.118 “Folding paper at the center and printing”
 Sorting printouts by copies (Collate pages)
Select this for sort-printing (1, 2, 3...).
 P.109 “Set the collate pages setting in the [Paper Handling] menu”
 P.110 “Set the collate pages setting in the [Print] dialog box”
 The [Print] dialog boxes vary depending on the application.
 The layout of the setting items may vary depending on the Mac OS.
 Set the collate pages setting in the [Paper Handling] menu
1
Select [Print] from the [File] menu of the application.
2
Select [Collate pages] from the [Paper Handling] menu.
3
Set other print functions, and then select this equipment from [Printer].
4
Click [Print] to send the job.