Toshiba E-STUDIO2000AC User Manual (English)

Other manuals for Toshiba E-STUDIO2000AC

Scanning Guide66 pages

Printing Guide174 pages

E-Filing Guide108 pages

Software Troubleshooting Guide82 pages

Software Installation Guide164 pages

Hardware Troubleshooting Guide112 pages

Copying Guide132 pages

Template Guide30 pages

Questions and Answers:

S
Shannon LopezJul 27, 2025
Why is the copied image from my Toshiba All in One Printer too light?
- M
  michael77Jul 27, 2025
  If the copied image from your Toshiba All in One Printer is too light, it could be due to several reasons. First, the toner might be depleted; if you see a message like “Install new *** toner cartridge”, replace it. Another reason might be that the copy density is set too light; try darkening the density manually or using the automatic density mode. If you are copying an original printed with erasable blue toner on an e-STUDIO5008LP Series, ensure that you are using the [Blue Original] mode. Also, in the e-STUDIO5008LP Series, if you are performing black-and-white copying with [Thick] paper selected, try selecting [Thick 1] as the paper type.
D
David OchoaAug 3, 2025
What to do if the copied image from my Toshiba All in One Printer is too dark?
- T
  Theresa RodriguezAug 3, 2025
  If the copied image from your Toshiba All in One Printer is too dark, it could be because the copy density is set too dark. Try lightening the density manually or using the automatic density mode. Also, if you're copying an original printed with black toner on an e-STUDIO5008LP Series, make sure the original mode is set to something other than [Blue Original].
R
Robert BarronAug 11, 2025
What to do if my Toshiba All in One Printer stops copying due to insufficient workspace?
- J
  Jessica PhillipsAug 11, 2025
  If your Toshiba All in One Printer stops copying during scanning and displays the message “Not enough Work Space to store originals. Will you print out stored originals?”, it means the printer's internal memory is full. To proceed with copying the scanned images, press [Yes]. If you want to cancel the copying process, press [No].
H
hhillAug 19, 2025
Why does my Toshiba E-STUDIO2000AC All in One Printer stop copying and say the number of originals exceeds the limits?
- E
  Evelyn HartAug 19, 2025
  If your Toshiba All in One Printer stops copying and shows the message “The number of originals exceeds the limits. Will you print out stored originals?”, it means you've reached the maximum number of pages that can be scanned. To copy the scanned images, press [Yes]. To cancel the operation, press [No].

Toshiba E-STUDIO2000AC Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed (Black)	20 ppm
Print Resolution	Up to 600 x 600 dpi
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Type	All in One Printer
Print Speed (Color)	20 ppm
Paper Size	A3, A4, A5, B4, B5
Connectivity	USB, Ethernet, Wi-Fi
Copy Speed	20 ppm
Fax Transmission Speed	33.6 kbps