3.OPERATING WITH A CLIENT COMPUTER
Managing Documents 61
OPERATING WITH A CLIENT COMPUTER
5
Select a user box to save the print job.
Select the desired user box number from the [Store to] box.
Enter the password for the user box in the [Password] box.
If you print a job as well as saving it in the user box, select the [Print] check box.
If you want to save a print job in a specified folder, enter its name in the [Box Folder] box.
To save data in an existing folder, enter its folder name in the [Box Folder] box.
To create a new folder and save data in it, enter the new folder name in the [Box Folder] box.
If the Enable SNMP Communication option is enabled on the [Configuration] tab, only the user boxes that have
been set up will be displayed in the drop-down list box.
6
Click [OK] or [Print] to save the print job.
The print job is saved in the specified user box.
To Next Page
Loading...
