5.SAVING COPIED DATA AS A FILE
Copying and Saving as a File 125
SAVING COPIED DATA AS A FILE
SMB
When you press any of the buttons below, the on-screen keyboard appears. When you finish the entry, press [OK].
NETWORK PATH: Press this to enter a network path to the folder where the data are to be stored.
LOGIN USER NAME: Press this to enter a user name to access the network folder. Enter this as required.
PASSWORD: Press this to enter a password to access the network folder. Enter this as required.
If you selected [SMB], the settings for [SERVER NAME] and [COMMAND PORT] are not required.
NetwareIPX / NetwareIP
When you press any of the buttons below, the on-screen keyboard appears. When you finish the entry, press [OK].
SERVER NAME: When you select [NetwareIPX], enter either the server name of NetWare server or Tree/Context (if
NDS is usable). When you select [NetwareIP], enter the IP address of NetWare server.
NETWORK PATH: Press this to enter a network path to a NetWare server folder where the data are to be stored. For
example, if the data should be transferred to a folder “sys\scan” of NetWare server, enter “\sys\scan”.
LOGIN USER NAME: Press this to enter a user name to login NetWare server. Enter this as required.
PASSWORD: Press this to enter a password to login NetWare server. Enter this as required.
To Next Page
Loading...
