4.Using the IP Fax Function
Using the IP Fax Function from the N/W-Fax Driver 57
Using the IP Fax Function
4
Click the [Send] tab and specify the recipients.
To specify recipients, enter them with the keyboard or select them from the address book.
P.60 “Specifying Recipients of IP Faxes”
On the [Send] tab, you can set the resolution of a fax cover sheet, etc. as well as specifying the recipients.
P.69 “Setting up the [Send] tab”
5
Confirm the recipients and click [OK].
The transmission settings are determined and the N/W-Fax driver properties dialog box is closed.
To Next Page
Loading...
