Toshiba e-STUDIO2018A - Role Management

4.Using the IP Fax Function
80 Using the IP Fax Function from TopAccess
You cannot specify more than 1 recipient for the destination of the Relay End Terminal Report.
 Role Management
On the [Role Management] scree of TopAccess, you can manage and register roles if you are logged in with the access
policy mode.
 P.81 “Default roles and privileges”
 P.82 “[Create New Role] screen”
For details about the access policy mode, refer to the TopAccess Guide.
Item name Description
1
[Add] button Adds settings to transmit the relay end terminal report.
2
[Cancel] button Cancels the settings.
3
[Reset] button Resets the settings.
4
Destination Enters the Email address or the IP Fax number of the recipient.
5
Fax Type Selects the fax type of the recipient.
6
Recipient list This displays the registered recipients. Select the E-mail address or IP Fax
number of the recipient.
Item name Description
1
[New] button Press this to add a new role.
 P.82 “[Create New Role] screen”
2
[Delete] button Press this to delete the role selected in the role list.
You cannot delete the default roles.
3
Role Name This displays the role name.
For more information about default roles, see the following:
 P.81 “Default roles and privileges”
You can check role information by clicking the role name.
For details, refer to the TopAccess Guide.
1
2
3