e-STUDIO202S UNPACKING AND INSTALLATION 5 - 9
13) Attach the Fan housing cushion to the cooling fan at the posi-
tion shown in the diagram below.
Cover the top and the right side of the fan housing when you
see the fan housing from the backside of the machine.
Note: Please make sure the double-sided tape is not exposed
where the cushion is sticking out from the edge of the
fan housing.
Attach the cushion leaving 3 - 7mm from the edge so that the
gap between the Fan housing cushion and the filter of the rear
cabinet is filled for sure.
14) Attach the parts removed in the items 1), 2), and 3).
A
View from
the arrow A
Back side
Attach the cushion leaving3-7mm
from the edge.
Reference position
3 - 7mm
To Next Page
Loading...
