Toshiba e-STUDIO206L - Chapter BASIC OPERATION; Basic Copying Operation

Chapter 2 BASIC OPERATION
20
Basic Copying Operation
The basic copying procedures, such as enlargement/reduction copying and duplex copying as well as bypass copying, are as
follows.
Making copies
Press the [COPY] button on the control panel.
11
Place the original(s).
& P.16 “Placing originals” in this manual
22
1
Key in the desired number of copies, and then
2
press the [START] button on the
control panel. Copying starts.
44
To stop copying, press the [STOP] button on the control
panel and then [MEMORY CLEAR] on the touch panel.
Printed paper exits to the exit tray of the equipment or the
Finisher (optional). The tray to which the paper exits is
indicated by the arrow on the touch panel.
•
•
Select the copy modes as required.
33
2
1