Toshiba e-STUDIO206L - Page 28

Chapter 2 BASIC OPERATION
26
Setting the transmission
conditions
Canceling reserved
transmissions
Press [OPTION].
11
The transmission condition setting
screen is displayed. Press or to
switch the pages.
22
Press [JOB STATUS].
11
RESOLUTION: Set the resolution based on the
neness of the original.
ORIGINAL SIZE: Set the scan size of the original.
After each item is set, press [OK].
33
1
Press [FAX],
2
select the reserved
transmission you want to delete, and
then
3
press [DELETE].
22
2
3
1
Press [DELETE] on the conrmation
screen. The reserved transmission is
deleted.
33