32 Log in
0.Log in
You must login to view and operate on items in [Administration] Tab.
If you fail to enter the correct password and are displayed “Please enter valid Password” message, contact your
administrator.
You cannot login when the equipment is operating. Retry to login when the equipment is not operating.
Only one user can login as an admin at a time.
After login, you will be automatically logged out when the time specified in the [Session Timer] elapses. For more
information about [Session Timer], see the following section:
P.35 “Setting up WEB General Setting”
You can log out by clicking the [Logout] link at the top right of each page. If you close TopAccess by clicking [X] (Close)
on the browser window instead of clicking [Logout], “PLEASE WAIT ADMINISTERED BY PC” will continue to appear on
the control panel of the equipment and neither operation nor login will be possible. In this case, turn the equipment
power OFF and back ON, or wait until the time set for [Session Timer] passes (default: 10 minutes). For more
information about [Session Timer], see the following section:
P.35 “Setting up WEB General Setting”
Item name Description
1 [Login] button Click this after entering the password. If the password is matched, the content
of [Administration] tab page will be displayed.
2 User Name User Name is fixed as “Admin”.
3 Password Input administrator password. The input password is hidden with symbols.
Enter “123456” to log in for the first time.
To Next Page
Loading...
