6
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/232/233/280/282/283
SCANNER
6 - 19
[C-2] LT series
(4) Take off 5 APS sensors by removing 1 screw
each.
Fig. 6-23
(1) Take off the lens cover
( P.6-18 "[B] Lens cover").
(2) Disconnect 1 connector from the SLG board.
(3) Remove 6 harness clamps.
Fig. 6-24
(4) Take off 4 APS sensors by removing 1 screw
each.
Fig. 6-25
To Next Page
Loading...
