e-STUDIO200L/202L/203L/230/232/233/280/282/283 © 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
PAPER FEEDING SYSTEM
9 - 14
[C] Bypass separation roller
(4) Remove 3 screws and take off the bypass
feed unit.
Fig. 9-11
(1) Take off the bypass feed unit
( P.9-13 "[B] Bypass feed unit").
(2) Remove 1 screw and take off the bypass
separation roller cover.
Fig. 9-12
(3) Take off the bypass separation roller unit.
Fig. 9-13
Screw Screw
Bypass feed unit
Bypass separation roller cover
Screw
Bypass separation roller unit
To Next Page
Loading...
